Hi!
Ich bekomme das QOS einfach nicht zum laufen....
Wie konfiguriere ich das QOS richtig?
Hier mein Beitrag aus dem englichen Forum und dem Bug-Tracker:
I've configured main uplink for QOS 2000kbit/s Up/Down and enabled it.
the Firewall creates 4 Classes
i created a new class called 'technic' (without ')
QOS Device: UPLINK:main
name: technic
reserved: 10%
limit: 10%
Priority: 1
net i created a rule:
Source: <ANY>
Class: technic
Destination Network/IP: (none) I leaved it blank
Service: <ANY>
Protocol: <ANY>
TOS: <ANY>
I've applied the rule.
Tested...... 2000kbit/s UP/Down 
This Rule does not work!
I've tried to restart qos manualy:
root@FIREWALL:~ # restartqos
2010-02-11 15:03:00,235 - restartqos.py[13487] - ERROR - Migration has to be fixed!!!
2010-02-11 15:03:00,236 - restartqos.py[13487] - INFO - Loading configuration
2010-02-11 15:03:00,264 - restartqos.py[13487] - ERROR - RETURNCODE [iptables -t mangle -N QOS 2> /dev/null] 1
2010-02-11 15:03:00,335 - restartqos.py[13487] - INFO - Setting QOS of device: eth1 [UPLOAD=2000, DOWNLOAD=2000]
2010-02-11 15:03:00,384 - restartqos.py[13487] - ERROR - RETURNCODE [iptables -t mangle -N QOS_ETH1 2> /dev/null] 1
2010-02-11 15:03:00,427 - restartqos.py[13487] - ERROR - RETURNCODE [iptables -t mangle -D QOS -o eth1 -j QOS_ETH1 2> /dev/null] 1
Skipping invalid rule: {'inputdev': '', 'protocol': '', 'src': '', 'tos': '', 'dst': '', 'dscp_class': '', 'dscp': '', 'classname': 'class0003', 'mac': '', 'dport': '', 'sport': ''}
.....
ok, a the rule was skipped
I've deleted the rule.
I've created a new rule
Source: IP
IP: 192.168.123.30 (IP of my PC in GREEN Subnet)
Class: technic
Destination Network/IP: (none) I leaved it blank
Service: <ANY>
Protocol: <ANY>
TOS: <ANY>
I've applied the rule.
Tested......near 2000kbit/s UP/Down
This Rule also does not work!
I've tried to restart qos manualy:
root@FIREWALL:~ # restartqos
2010-02-11 15:03:00,235 - restartqos.py[13487] - ERROR - Migration has to be fixed!!!
2010-02-11 15:03:00,236 - restartqos.py[13487] - INFO - Loading configuration
2010-02-11 15:03:00,264 - restartqos.py[13487] - ERROR - RETURNCODE [iptables -t mangle -N QOS 2> /dev/null] 1
2010-02-11 15:03:00,335 - restartqos.py[13487] - INFO - Setting QOS of device: eth1 [UPLOAD=2000, DOWNLOAD=2000]
2010-02-11 15:03:00,384 - restartqos.py[13487] - ERROR - RETURNCODE [iptables -t mangle -N QOS_ETH1 2> /dev/null] 1
2010-02-11 15:03:00,427 - restartqos.py[13487] - ERROR - RETURNCODE [iptables -t mangle -D QOS -o eth1 -j QOS_ETH1 2> /dev/null] 1
What's gonig wrong?
tryed an other endian 2.3, same result
DANKE!
